Fixing Common NTFS and FAT32 Partition Errors

Fixing Common NTFS

If you want to recover files due to deletion, formatting, partition loss or damage, system crash, etc. especially under Windows operating system, we recommend our free data recovery software – EaseUS Data Recovery Wizard Free, which works well with RAID hardware and hard drives, SD cards and memory cards, etc.

Photo Unsplash

Frequent FAT32 and NTFS partition error repair

SYMPTOMS:
When we try to boot after the hardware test procedures, we see a blank screen with no message.

Solution:
Run Partition Table Doctor, you can automatically review and repair the partition table error.

SYMPTOMS:
No active partition is found on the hard disk.

Solution:
Run Partition Table Doctor, and report some messages as follows:
ERROR: There is no active primary partition in Harddisk1.
Do you want to configure the active primary partition in Harddisk1?
Click the ‘Yes’ button to resolve this issue.

SYMPTOMS:
FAILURE OF THE BOOT DISK, INSERT THE SYSTEM DISK AND PRESS ENTER.

Solution:
Run Partition Table Doctor, and report some messages as follows:
ERROR: There is no active primary partition in Harddisk1.
Do you want to configure the active primary partition in Harddisk1?
Click the ‘Yes’ button to resolve this issue.

SYMPTOMS:
Invalid partition table.

Solution:
Run Partition Table Doctor, and report some messages as follows:
ERROR: Invalid primary partition startup indicator in Harddisk1.
Do you want to correct the error?
Click the ‘Yes’ button to resolve this issue.

SYMPTOMS:
Operating system is missing.

Solution:
Run Partition Table Doctor, and report some messages as follows:
ERROR: Partition 1 in Harddisk1 absolute boot sector is 16191.
The correct boot sector is 63.
Do you want to correct the error?
Click the ‘Yes’ button to resolve this issue.

SYMPTOM:
Infection or boot virus.

Solution:
Perform partition recovery, run Partition Table Doctor and choose the “Rebuild Partition Table” function from the “Operations” menu. For more details see ‘Rebuild MBR’.

SYMPTOMS:
Invalid unit specification messages. We want to find my lost partition.

Solution:
Run Partition Table Doctor and choose the “Rebuild Partition Table” function from the “Operations” menu.

SYMPTOMS:
– Invalid media type reading unit.
Abort, retry, fail?
– The file system is displayed as RAW.
– Windows might ask if you want to format the drive.
– File names contain strange characters.
– Sector messages not found.

Solution:
Run Partition Table Doctor and choose the ‘Fixboot’ function from the ‘Operations’ menu. For more details see ‘Fixboot’.

You may be interested:

Facebook Comments