How to Remove Moisture and Mold from Clothing

Remove Moisture and Mold from Clothing

Mold stains on clothing can be caused by a variety of factors, including humidity in the closet, on walls, or simply in a room environment.

And it is that the mold in the clothes usually appears above all in clothes made of cotton, as well as another type of organic materials that are a focus of reproduction perfectly viable for the mold to develop and end up producing those unsightly stains.

That is why in order to try to remove any mold stain on clothing as soon as possible, we must be careful when storing our clothes if we want to prevent such problems happen.

However, if moisture and mildew have impregnated your wardrobe and you’ve come here to get the best tips for removing moisture stains from clothing, you’re in the right place, because at stainremover.net today, we show you how.

Mold stains are detrimental to clothing but also to health

And it turns out that if we are not careful, mold and moisture can cause rashes and redness on the skin, as well as sneezing, allergic reactions and a series of problems that if not tackled in time can become complicated.

A good way to recognize a mold stain is through odor, because once these are large enough, clothing, like the rooms of a room that may have this problem, often gives off a strong odor of moisture.

That is why it is always advisable to control the humidity of the houses so that we can avoid the appearance of this type of stains.

How to remove moisture stains from clothing with vinegar

White vinegar is a very effective element to get rid of any type of mold stain on clothing. In short, it is also a good ally against the odour produced by the appearance of mould particles.

To proceed with this method, take a container and pour about 250 ml of vinegar followed by 1 L of water. Then, like the previous technique, soak the garments for a couple of hours. Once you have finished, put the clothes in the washing machine with the liquid detergent that you normally use and, if the stain is still there, repeat the whole process.

How to remove mold stains on carpets

Do you need to remove a mold stain on the carpet? Okay, but first you have to take into account that these types of fabrics are usually quite delicate, but if you follow the advice we give you here will not have any problem.

  • Take the vacuum cleaner and clean as much mold as possible.
  • In a container, mix one tablespoon of liquid detergent with 500 ml of water. Shake to foam.
  • Using a sponge or a damp cloth, put the foam obtained from the previous mixture on top of the part of the carpet where you have the stain.
  • Repeat the above steps until you see the stain disappear.
  • Finally, rinse with warm water and dry the area as much as you can.

How to remove mold stains on upholstery

For common upholstery:

  • Try to shake the object that has been stained with mold on the outside. Remember not to do it indoors so that any small mold spores that might be there don’t spread throughout the home.
  • If this is not possible, as with carpets, vacuum the affected area and try to remove as much mold as you can.
  • In a bowl, put water and ammonia in equal parts. Then apply the solution on top of the mould stain using a clean sponge.
  • Take a cloth and dry the area.
  • If you see that the stain does not completely disappear, repeat the process as many times as necessary.
  • When it finally disappears, rinse with water so that any remaining ammonia is removed.
  • Dry the area you have humidified in the open air or, if this is not possible, use a fan.

Tips for removing moisture stains from clothing

With a few drops of bleach and water

This is an incredibly effective way to remove mold stains from clothing. All you have to do is add a few drops of bleach (a quarter glass) for every liter of water you pour.

Once you have the mixture in a bowl, introduce the garment and leave it to soak for approximately 1-2 hours, which will depend on how big the stain. When the hours have passed, wash the clothes as usual.

With borax

Another homemade trick to get rid of damp clothes is to use borax. If you live in Spain, you can buy it in the supermarket whose name begins with “M”, and if on the contrary, you are outside the peninsula, ask in the nearest drugstore or in your trusted grocery store.

However, it is not strictly necessary for you to buy this product alone, you can also opt for a borax detergent and wash your clothes with it. They’ll both work.

To remove borax mold stains, add half a glass of borax and 1 L of water in a container. Soak the stained area and leave it for 1 hour. When you’re done, wash as usual.

Note: in this case it is very important that you use hot water.

With baking soda

In a small bowl or glass, mix vinegar and baking soda. With a spoon, pick up some of the mixture and spread it over the stained surface. Let it work for 10 minutes and then, using a soft brush, rub from the outside inwards. Then he washes as usual.

Note: This works best for small mold stains.

Withlemon juice and salt

Unlike what some would like, in this case the lemon juice and salt is not to make us a tequila, but to form a compact paste that we can then apply to the stained area.

Once you have it, place it on top of it and let it act for a while. With this, the mold spores will be absorbed and, hopefully, the garment will dry out.

Note: in alternative fabrics such as cotton, polyester or similar, the method proposed here is highly effective, although not as much or as recommended in those delicate fabrics such as silk or wool, as they can end up damaging the clothes.

To remove mold stains on leather…

Helping you with a soft brush, brush the stain with it. Afterwards, dry the garment in the sun for a while. Finally, either by using water and a bactericidal soap, it removes the stain of moisture or mold.

In case you need to remove mold stains on leather with alcohol, it is important that the one you use is a denatured alcohol, which you will mix in a container with a little water. Afterwards, moisten a clean cloth and rub the stain gently. Afterwards, let it dry and check to see if any moisture is gone.

For leather shoes

It is common the appearance of mold stains in this type of shoes, so as long as you need to get rid of them, you will need, in a container, to mix water and vinegar in equal parts.

Then take a clean cloth and moisten it in the solution. Then gently rub the shoe trying not to damage it.

Note: Mold stains are not easy to remove, but if you follow these home remedies be sure that you will have no complications in removing them.

You may be interested:

How to Repair Scratched Glass

Remove Pen Ink Stains

How to remove dry stains from carpets

Facebook Comments
Was this article useful?
[Total: 5 Average: 5]